This is the most common question we get asked! Here are three simple methods below. If you have any questions, please contact us.
- Find the Part code.
- Measure the Span and Width of the tyre or guard required.
- Identify the Tyre Size.
These are outlined with images below.
- Find the Part Code.
If you are replacing an existing Rhino plastic or stainless product, there will be a part code on the guard.
An example of the plastic part code is shown.
2. Measure the Span and Width of the tyre or guard required.
For the best fit, we recommend measuring the span and width of the wheels plus some clearance of between 50mm-100mm from the wheel (less if you want a close fit, more if you require more clearance). This will give you the span and width of the mudguard and you can use this to select your guard (shown in the image).
3. Identify the Tyre Size.
Get your tyre size. These come in the format of the image to the side and are on the side wall of the tyre. Use this tyre size to match with our product which lists the tyre sizes that suit each guard (where known). Watch this space for our online tyre size guide coming soon!