Infill spacers fit between the guards and add stability to guard fittings, reduce spray and make for a classy finish. There are two options – the box or U shape and are manufactured ready for installation. Infill spacers are available in either aluminium or stainless and come in a range of spans and widths to suit your requirements.
These top of the range spacers are expertly welded to give the best finish. Boxed spacers are flat on top with folds on three sides with the inside edge facing the chassis left open. The folds on the widths are at 90 degrees to fit the bottom of the guard.
Made to fit most guards in the Rhino range the standard width is 600mm and standard height is 40mm.
Standard material is 3mm.
Sizing Guide (all measurements are in mm).
MINIMUM ORDER QUANTITY IS 10.
Other sizes are available on request here.
Alloy Weld Part # | Span | Width | Height |
IFBALW1060 | 100 | 600 | 40 |
IFBALW1260 | 125 | 600 | 40 |
IFBALW1560 | 150 | 600 | 40 |
IFBALW1760 | 175 | 600 | 40 |
IFBALW2060 | 200 | 600 | 40 |
IFBALW2260 | 225 | 600 | 40 |
IFBALW2560 | 250 | 600 | 40 |
IFBALW2760 | 275 | 600 | 40 |
IFBALW3060 | 300 | 600 | 40 |
IFBALW3260 | 325 | 600 | 40 |
IFBALW3560 | 350 | 600 | 40 |
Want to know more or have questions? What mud guard or mud flap?
What guard suits the wheel size? What style, colour or material?
Please Contact us or check out our blogs for important information.
Copyright 2024 © Rhino Manufacturing, New Zealand & Australia. All rights reserved.