Rhino Light Trailer Guards – How to select best fit.
Simple guide to measuring span and width to select RHINO light trailer guards.
Guards are available for the following options.
Single
Tandem
Triaxle** MOQ applies
How to Select Your Light Trailer Guard
Measure the Span and Width of the wheels.
Add your Desired Clearance – less clearance creates a close fit; more clearance to allow for Tyres, load weights, suspension.
Determine Guard Dimensions – Use your measurements (including the added clearance) to determine the final span and width of your mudguard.
For the best fit, we recommend measuring the span and width of the wheels. Then add your desired amount of clearance, e.g. for the span between 50mm-100mm from the wheel (less if you want a close fit, more if you require more clearance). This will give you the span and width of the mudguard and you can use this to select your guard.
Singles The height of single guards are half the span, so a 700mm span guard will be 350mm high. Tolerances are +/- 15mm in length and height and -5mm in width. Custom heights are available on request for bulk orders.
Tandems and Triaxles The height of tandem and triaxle guards are 400mm high. Tolerances are +/- 15mm in length and height and -5mm in width. Custom heights are available on request for bulk orders.
Summary
Light Trailer guards are available in three configurations: Single, Tandem, and Triaxle. To choose the right guard, measure the span and width of your wheels, then add clearance depending on the fit you want.
